Top 10 Best Ball Joints For Jeep Jk In 2022

Last Update:

You can trust our selection for Ball Joints For Jeep Jk Reviews. Because We have worked hard studying and analyzing 54267 reviews for Ball Joints For Jeep Jk and rating them. It was a difficult job to list only ten products for Ball Joints For Jeep Jk where thousands of them available online. I hope it will help you to take final decision for Best Ball Joints For Jeep Jk.

.

Our team scanned 54267 reviews before putting any suggestions for the Ball Joints For Jeep Jk in this article.

Comparison Chart of Top 10 Ball Joints For Jeep Jk

NoProductScoreAction
1Rough Country Heavy Duty Replacement Ball Joints for 07-18 Jeep Wrangler - 106269.8Buy on Amazon
2BALL JOINT KIT - COMPATIBLE WITH JEEP JK WRANGLER OR WJ GRAND CHEROKEE DANA 309.8Buy on Amazon
3Ball Joint Service Adapter Fit for Jeep/Dodge9.4Buy on Amazon
4MOOG K3185 Ball Joint9.2Buy on Amazon
5MOOG K3134T Ball Joint9Buy on Amazon
6DV8 Offroad - D-JKBLJNT-01 - Ball Joint Set for 07-18 Wrangler JK - Dana 30 & Dana 44 Axles - Heavy Duty Replacement - Greaseable - Grooved Cap - Includes (2) Upper and (2) Lower Ball Joints8.8Buy on Amazon
7TeraFlex 3442002 Ball Joints (Premium JK Dana 30/44 Ball Joint Kit)8.6Buy on Amazon
8TeraFlex 3442022 JK Dana 30/44 Complete Knurled Ball Joint Set8.4Buy on Amazon
9Alloy USA 11800 Suspension Ball Joint Kit8.2Buy on Amazon
10Dana 2007354 Suspension Ball Joint and Component (Joint Kit Upper/Lower Per Side - Dana 30/44 Jk)8.2Buy on Amazon
Disclaimer: MyLegitInfo is a Reader-supported Platform. As an Amazon Associate, we earn from Qualifying Purchases.

1. Rough Country Heavy Duty Replacement Ball Joints for 07-18 Jeep Wrangler – 10626

  • Set of 4 ball joints (2 Upper & 2 Lower)
  • Fit Dana 30 & Dana 44 Axles
  • Chromoly Ball Stud
  • Polyurethane Dust Boot
  • Backed by Rough Country’s 3 Year Warranty

2. BALL JOINT KIT – COMPATIBLE WITH JEEP JK WRANGLER OR WJ GRAND CHEROKEE DANA 30

  • National Drivetrain
  • AVAILABILITY ALERT – SEE DESCRIPTION !!

3. Ball Joint Service Adapter Fit for Jeep/Dodge

  • PERFECT FITMENT: Fit for 1984-newer “downsized” Jeep Wagoneer, 2WD and 4WD Cherokee and Comanche, 1987-newer Jeep Wrangler, 1990-newer Jeep Renegade, 1993-newer Jeep Grand Cherokee, 1994-newer Dodge Ram 1/2-ton 4WD pickup.
  • SUPERIOR QUALITY: Machined from high quality steel to ensure great tolerance and resistance to corrosion and rust.
  • APPLICATION: Adapters designed to both install new and receive old pressed out ball joints.
  • ADVANTAGES: These adapters are awesome assistants to remove and install the offset ball joints used to change caster/camber, making the job much easier and safer than just using the generic set of adapters which come with many ball joint presses.
  • SATISFACTION GUARANTEE: If you’re not 100% satisfied with our Adapter Kit, simply return it for a full refund in 30 days, no questions asked money back guarantee.

4. MOOG K3185 Ball Joint

  • PROBLEM SOLVER GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life.
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength.
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants.
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box.
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

5. MOOG K3134T Ball Joint

  • PROBLEM SOLVER GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life.
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength.
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life.
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box.
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

6. DV8 Offroad - D-JKBLJNT-01 - Ball Joint Set for 07-18 Wrangler JK - Dana 30 & Dana 44 Axles - Heavy Duty Replacement - Greaseable - Grooved Cap - Includes (2) Upper and (2) Lower Ball Joints

  • FITMENT: Compatible with 2007-2018 Jeep Wrangler JK equipped with a Dana 30 or Dana 44 axle.
  • WHAT IS A BALL JOINT: Flexible ball and joint socket that connects the vehicles control arm to he steering knuckle.
  • OUR DESIGN: Upgraded replacement ball joint that is greaseable for increased longevity, offers deep groves on the cap to aid in reduced turning and green finish allows easier spotting of wear and tear.
  • BUILT TO LAST: Constructed from SAE4140 chromoly studs and utilizing SAE1045 steel housing for extreme durability and reliability.
  • COMPLETE SET: Both Upper and Lower ball joints for 1 complete axle and includes all hardware required for installation.

7. TeraFlex 3442002 Ball Joints (Premium JK Dana 30/44 Ball Joint Kit)

  • Fits JK/JKU Wrangler w/ Dana 30 or 44 axle
  • Adjustable
  • 4140 Chrome Moly
  • Graspable
  • Lifetime
  • All 4 Ball Joints
  • Fits 07-12 JK ONLY
  • 4140 Chrome Moly
  • Greasable!
  • 2013 and newer require axle shaft modification (Grinding).

8. TeraFlex 3442022 JK Dana 30/44 Complete Knurled Ball Joint Set

  • Extremely hard sintered wear bushings to handle extreme side load demands w/out failure
  • Heat treated 4140 chromyl ball/stud & 1045 carbon steel housing
  • Factory-style serrated flange nut & grease fitting
  • Fits all years and models of JK/JKU Wranglers for either Dana 30 or 44 Front Axles

9. Alloy USA 11800 Suspension Ball Joint Kit

  • Not for use with CV front axle shafts
  • Greater strength
  • Low profile Zero fittings
  • Hardware included
  • Exclusive threaded preload system

10. Dana 2007354 Suspension Ball Joint and Component (Joint Kit Upper/Lower Per Side – Dana 30/44 Jk)

  • Highly Durable Product
  • Item Package Weight:0.5 Pounds
  • Fit Type: Vehicle Specific
  • Package Weight: 1.054 Kilograms

Final Word


So, listed above are all of the Best Ball Joints For Jeep Jk that you can consider buying for your needs.
If you find any product featured here incorrect, irrelevant or simply outdated, please let us know by dropping a comment below. We will update as early as possible

Leave a Comment