Top 10 Best Oxygen Sensor Socket In 2022

Last Update:

Our team studied on 55734 reviews available online for Oxygen Sensor Socket, chose the finest ones and prepared Oxygen Sensor Socket Reviews for you. It was very difficult to shortlist the ideal Oxygen Sensor Socket from thousands of products online. However, We tried to make sure that you get only the Best Oxygen Sensor Socket from our suggestions. Check our listings-:

Comparison Chart for Best Oxygen Sensor Socket

In this article we've included our suggestions for the Oxygen Sensor Socket after analyzing 55734 reviews.

Comparison Chart of Top 10 Oxygen Sensor Socket

NoProductScoreAction
1TEKTON 3/8 Inch Drive x 7/8 Inch 6-Point Oxygen Sensor Socket - 49299.8Buy on Amazon
2AP1822F 3/8-inch Drive by 7/8-inch (22mm) Offset Oxygen Sensor Socket High-performance chrome molybdenum steel construction Wire Gate Accesses Sensor from The Side9.6Buy on Amazon
3TEKTON 3/8 Inch Drive x 7/8 Inch Offset 6-Point Oxygen Sensor Socket - 477499Buy on Amazon
4aremnry 7pcs O2 Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set Vacuum Switch Socket Removal Installer Tool Kit9Buy on Amazon
5ARES 70039-3/8-Inch Drive by 7/8-Inch (22mm) Offset Oxygen Sensor Socket - Wire Gate Accesses Sensor from Side8.8Buy on Amazon
6WYNNsky Oxygen Sensor Remover Set8.6Buy on Amazon
7GEARWRENCH 8 Pc. Sensor and Sending Socket Set - 417208.4Buy on Amazon
85 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool8.4Buy on Amazon
9ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set8.2Buy on Amazon
10Offset Oxygen Sensor Socket 3/8-Inch Drive by 7/8-Inch 22mm Wire Gate Accesses Sensor from Side8.2Buy on Amazon
Disclaimer: MyLegitInfo is a Reader-supported Platform. As an Amazon Associate, we earn from Qualifying Purchases.

1. TEKTON 3/8 Inch Drive x 7/8 Inch 6-Point Oxygen Sensor Socket - 4929

  • Removes and installs oxygen sensors on vehicles with computer-controlled engines
  • Common 6 point, 7/8 in. (22mm) socket fits most oxygen sensors
  • Side cutout prevents damage to wires
  • Use with any 3/8 in. drive ratchet or breaker bar
  • Constructed from drop forged, heat treated, chrome vanadium steel
  • High-contrast, permanent, laser etched size markings are easy-to-read, even in low light
  • Length: 3.3 in., Width: 1.4 in., Height: 1.4 in.

2. AP1822F 3/8-inch Drive by 7/8-inch (22mm) Offset Oxygen Sensor Socket High-performance chrome molybdenum steel construction Wire Gate Accesses Sensor from The Side

  • DESIGN: Our socket’s slotted design allows you to remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
  • QUALITY:This socket made from premium Chrome Molybdenum steel, the socket allows users to exert maximum torque while the precision casting ensures accurate fit and function.
  • FUNCTION: Even if you don’t have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car’s emissions and gas mileage.
  • FEATURES:Removes and installs oxygen sensors on vehicles with computer-controlled engines,Common 6 point, 7/8 in.
  • LIFETIME WARRANTY – This air door actuator comes complete with a lifetime warranty.

3. TEKTON 3/8 Inch Drive x 7/8 Inch Offset 6-Point Oxygen Sensor Socket - 47749

  • Removes and installs oxygen sensors on vehicles with computer-controlled engines
  • Common 6 point, 7/8 in. (22mm) socket fits most oxygen sensors
  • Offset drive with wire gate accesses sensor from the side, not the top, preventing damage to wires
  • Use with any 3/8 inch drive ratchet or breaker bar
  • High-performance chrome molybdenum steel construction
  • High-contrast, permanent, laser etched size markings are easy-to-read, even in low light
  • Length: 2.2 in., Width: 1.4 in., Height: 1.2 in.

4. aremnry 7pcs O2 Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set Vacuum Switch Socket Removal Installer Tool Kit

  • Applications】 Designed for the removal and installation of oxygen sensors, oil pressure sending units and vacuum switches equipped with wires or vacuum tubes.
  • Material Solid】 Heat treated chrome vanadium & chrome molybdenum steel (CR-V) with black oxide finish for corrosion resistance.
  • Including】7/8″ Short low Profile O2 Oxygen Sensor Socket, 7/8″ Universal Oxygen Sensor Socke 7/8″ Universal Vacuum Switch PVS, TVS Socket Tool.
  • Function】 This set can work in the tight space around an O2 sensor to remove or install quickly and efficiently.
  • Easy Storage】Comes in a blow molded case for safe & easy transport and storage.

5. ARES 70039-3/8-Inch Drive by 7/8-Inch (22mm) Offset Oxygen Sensor Socket – Wire Gate Accesses Sensor from Side

  • DESIGN: This socket’s slotted design allows you to remove oxygen sensors with the wiring harness still attached.
  • QUALITY: Made from premium Chrome Molybdenum steel, the oxygen sensor socket allows users to exert maximum torque while the precision casting ensures accurate fit and function.
  • WHY YOU NEED IT: Even if you don’t have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car’s emissions and gas mileage.
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools.
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program.

6. WYNNsky Oxygen Sensor Remover Set

  • Application: This socket set is designed for the removal inspection or replacement of heated and non-heated oxygen sensors fitted to the following vehicle Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda.
  • 3/8’’ Drive × 7/8’’ ×1/2’’ Oxygen Sensor Socket/Vacuum Switch Socket removes and installs vacuum switch with a 7/8’’ hex and some oxygen sensors; 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles.
  • 1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models; 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles; 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units.
  • 1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors; 3/8’’ Drive × 7/8’’ ×1-1/4’’ low profile design for use in tight spaces.
  • This set includes 1-1/16 and 1 in.

7. GEARWRENCH 8 Pc. Sensor and Sending Socket Set – 41720

  • Designed for the removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches.
  • Includes 3/8″ drive 7/8″ slotted socket for PVS, TVS and O2 sending units
  • Includes 3/8″ Drive 7/8″ (22mm) socket for Oxygen Sensor Units
  • Includes 3/8″ Drive 1-1/16″ Deep socket for Oil Pressure Sending units
  • Includes 3/8″ Drive 7/8″ (22mm) Low Profile Offset socket for O2 Sensor Unit
  • Includes 1/2″ Drive 1-13/16″ socket for Oil Sending Unit
  • Includes 1/2″ Drive 1-1/16″ socket for Thermal Sensor units
  • Durable blow mold case for safe storage and tool retention

8. 5 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool

  • Design】 Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
  • USE】 Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don’t have a lot of experience working with cars.
  • Package】1-pc 3/8” Dr.
  • Material】 Made from high performance chrome molybdenum and solid cast steel construction for strength and durability – Finished with Black Oxide to prevent rust.
  • Service】100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund.

9. ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

  • Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location
  • 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
  • Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
  • Set Including: 1-pc 3/8” Dr.

10. Offset Oxygen Sensor Socket 3/8-Inch Drive by 7/8-Inch 22mm Wire Gate Accesses Sensor from Side

  • Common 6 point, 7/8 in (22mm) socket, suitable for most oxygen sensors.
  • The socket is slotted so that you can remove the oxygen sensor while still connected to the wiring harness, and the socket is offset and compact, providing additional leverage even in hard-to-reach spots.
  • This socket made from premium Chrome Molybdenum steel, the socket allows users to exert maximum torque while the precision casting ensures accurate fit and function.
  • Even if you don’t have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car’s emissions and gas mileage.
  • Thank you!

Final Word


So, listed above are all of the Best Oxygen Sensor Socket that you can consider buying for your needs.
If you find any product featured here incorrect, irrelevant or simply outdated, please let us know by dropping a comment below. We will update as early as possible

Leave a Comment