Top 10 Best Tie Rod For Jeep Jk In 2022

Last Update:

Our team studied on 52174 reviews available online for Tie Rod For Jeep Jk, chose the finest ones and prepared Tie Rod For Jeep Jk Reviews for you. It was very difficult to shortlist the ideal Tie Rod For Jeep Jk from thousands of products online. However, We tried to make sure that you get only the Best Tie Rod For Jeep Jk from our suggestions. Check our listings-:

Comparison Chart for Best Tie Rod For Jeep Jk

52174 reviews were considered when writing our recommendations for the Tie Rod For Jeep Jk in this article.

Comparison Chart of Top 10 Tie Rod For Jeep Jk

NoProductScoreAction
1Doetsch Off-Road 07-18 Jeep JK/JKU 7075 1 TON ALUMINUM TIE ROD & DRAG LINK Steering Flip Kit with 1-Ton Offset Ends9.8Buy on Amazon
2MOOG DS300005 Tie Rod End9.8Buy on Amazon
3Rugged Ridge 18050.82 Steering Kit9.6Buy on Amazon
4MOOG DS300043 Tie Rod End9.4Buy on Amazon
5Doetsch Off-Road 07-18 JEEP JK/JKU 7075 1 TON ALUMINUM TIEROD9.4Buy on Amazon
6Synergy Mfg replacement Heavy Duty Drag Link Kit for the JK (Supersedes part number 8001)9Buy on Amazon
7Steering Tie Rod End Inner Outer LH RH Set of 4 for 07-16 Jeep Wrangler JK8.8Buy on Amazon
8TeraFlex 1853910 Tie Rod Kit (JK HD)8.6Buy on Amazon
9TeraFlex 1853900 JK HD Tie Rod and Drag Link Kit8.4Buy on Amazon
10MOOG ES800983S Tie Rod End Adjusting Sleeve8.2Buy on Amazon
Disclaimer: MyLegitInfo is a Reader-supported Platform. As an Amazon Associate, we earn from Qualifying Purchases.

1. Doetsch Off-Road 07-18 Jeep JK/JKU 7075 1 TON ALUMINUM TIE ROD & DRAG LINK Steering Flip Kit with 1-Ton Offset Ends

  • 1.5″ diameter 7075 aluminum Heavy Duty Tie Rod with a Limited LIFETIME Warranty
  • 1.5″ diameter 7075 aluminum Heavy Duty Drag Link with a Limited LIFETIME Warranty
  • Greasable 1-Ton Offset Heavy Duty Tie Rod Ends with a 18 month Limited Replacement
  • Machined wrench flats into each end of the bar, so that you can easily get a wrench on it for adjustment.

2. MOOG DS300005 Tie Rod End

  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life.
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life.
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength.
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box.
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on.

3. Rugged Ridge 18050.82 Steering Kit

  • ONE TON STRENGTH: Beef up your ride with this bolt-on drag link that prevents bent tie rods from wheeling with larger tires.
  • STEEL TUBES: The drag link is 1 1/4″ ID steel that is cold rolled, pierced and drawn through dies to produce a 1/4″ wall thickness for industrial strength and durability.
  • OFFROAD ACCESSORIES: Get serious about off-roading with a variety of tow hooks, hitches & kits that give yourself a way out in sticky situations.
  • RUGGED RIDGE JEEP PARTS: Count on Rugged Ridge to provide you with proven Jeep parts & accessories like bumpers, lift kits, wheels, interior accessories, floor liners & more for varying Jeep models.
  • FIVE YEAR WARRANTY: Our Rugged Ridge products are covered by industry leading 5 year warranty & Rugged Ridge Floor Liners have Limited Lifetime Warranties providing customers with repair or replacements subject to certain common exclusions.

4. MOOG DS300043 Tie Rod End

  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life.
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life.
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength.
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box.
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on.

5. Doetsch Off-Road 07-18 JEEP JK/JKU 7075 1 TON ALUMINUM TIEROD

  • 1.5″ diameter 7075 aluminum Heavy Duty Tie Rod with a Limited LIFETIME Warranty
  • Greasable 1-Ton Offset Heavy Duty Tie Rod Ends with a 18 month Limited Replacement
  • Includes Doetsch Offroad 6061 Aluminum 1.
  • Machined wrench flats into each end of the bar, so that you can easily get a wrench on it for adjustment.

6. Synergy Mfg replacement Heavy Duty Drag Link Kit for the JK (Supersedes part number 8001)

  • Drag Link fits all JK, including those with aftermarket JK axle housings.
  • Larger tubing size than previous design improves drag link strength and steering feel.
  • Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock and include grease fittings/replaceable dust boots for ease of maintenance.
  • Pitman arm side tie rod end is now a single plane design to eliminate unwanted drag link flop.
  • Drag Link Flip Adapter is NOW INCLUDED for those who will be converting to high steer.

7. Steering Tie Rod End Inner Outer LH RH Set of 4 for 07-16 Jeep Wrangler JK

  • Reference Number(s): 5086143AB,52060049AE,52060053AE,52060048AD,ES3624,ES800594,DS300005,ES800593
  • Quantity: 4 Piece

8. TeraFlex 1853910 Tie Rod Kit (JK HD)

  • HD 1.6″ O.D. 4140 heat treated chromyl
  • Over 200% stronger than factory tie rod
  • Tie rod end joint incorporates same features found in TeraFlex ball joints, including 4140 chromyl ball/stud and 1045 carbon steel housing.
  • Includes the clamp #1123160, or the TeraFlex Steering Stabilizer Relocation Kit

9. TeraFlex 1853900 JK HD Tie Rod and Drag Link Kit

  • Heat treated chromyl
  • Forged tie rod end housing designed specifically for JKs
  • Adjustable preload tension to ensure proper long term durability

10. MOOG ES800983S Tie Rod End Adjusting Sleeve

  • Package Dimensions: 3.25 L x 4 H x 1.75 W (inches)
  • Package Weight : 0.5 pounds
  • Country of Origin : Taiwan, Province Of China
  • Part number: ES800983S

Final Word


So, listed above are all of the Best Tie Rod For Jeep Jk that you can consider buying for your needs.
If you find any product featured here incorrect, irrelevant or simply outdated, please let us know by dropping a comment below. We will update as early as possible

Leave a Comment